Laser pipe cutting machine routine maintenance

Maintenance refers to the protection and repair of things to keep them in a normal state. Daily maintenance and maintenance can make the equipment work better, and can also make the equipment last longer, creating greater value for us. Next, let Chittak tell you about the daily maintenance and maintenance of the laser tube cutting machine.

1. Before starting the machine every day, carefully check the pressure of the laser working gas, auxiliary gas and auxiliary gas for cutting. If the gas pressure is not enough, it should be replaced in time, and check whether there is any leakage in the pipeline;
2. Check whether the laser ready button is damaged (check the indicator light), and whether the emergency stop button of the machine tool is normal;
3. Check whether the limit switches of the X-axis, Y-axis, and Z-axis and the mounting screws of the collision block are loose, and whether the limit switches of each axis are sensitive;
4. Check the circulating water level in the water tank of the chiller, if it is insufficient, it must be added in time. Change the water and clean the dust cover once a week;
5. After the cutting is completed every day, check whether the lens of the protective mirror is damaged;
6. After the work is completed, clean up the cutting waste in time, clean the work site, and keep the work site neat and clean; at the same time, do a good job of cleaning the equipment to ensure that all parts of the equipment are clean and free of stains, and no debris can be placed on any part of the equipment.
7. After the daily work is completed, open the drain valve of the air storage tank at the bottom of the air compressor to drain water, and close the valve after the waste water is discharged.
8. After the daily work is completed, shut down according to the shutdown steps, and then turn off the total power of the entire machine tool.

The above is the daily maintenance and maintenance of the laser tube cutting machine. I hope it can be helpful to you. If you want to know more about the laser tube cutting machine, welcome to Guangdong Chittak Intelligent Equipment.